Archives

When the battery is low, the carbon monoxide detector reacts as follows: Orange indicator light flashes once every 60 seconds for at least 30 days Audible alert: 1 beep every 60 seconds for at least 30 days The detector is not operational. The detector must be replaced.

To stop the current alarm from your carbon monoxide detector : Briefly press the central button on the front of the detector Red indicator light flashes once every 10 seconds for about 10 minutes The detector resets automatically after 10 minutes.

Pausing the alarm allows you to control a future false alarm in advance (e.g. use of candles or incense, cigarette smoke, etc.). To temporarily pause the carbon monoxide detector : Briefly press the sensor button Red LED flashes every 10 seconds for about 10 minutes The detector resets automatically after 10 minutes.

To test the operation of the carbon monoxide detector : Press the button on the detector until the alarm signal sounds, then release. The alarm buzzer sounds, and the red LED flashes several times a second. The detector is operational after 10 minutes If the test does not work, the detector has probably identified a […]

Your carbon monoxide detector features red (alarm), orange (maintenance) and green (operation) indicator lights on the front panel, plus a Test/Silence button. On the back of the product you’ll find the settings button and LED, as well as the battery cover. Your detector is fitted with a sealed 10-year battery: the battery door is locked. […]

NEXELEC sensors can measure various environmental parameters such as noise or ambient brightness. Depending on country and environment, and according to WHO recommendations, thresholds may vary.   Noise level Exposure to excessive noise can lead to hearing fatigue and long-term deafness. If the measured noise level is too high, identify the source and move away […]

When a fault is detected, the smoke detector reacts as follows: Red indicator light flashes once every 45 seconds Audible alert beeps 3 times every 45 seconds The detector is not operational. Make sure you have complied with the precautions and limits for use of the detector. Clean the back of the detector using the […]

At the end of its service life, the smoke detector reacts as follows: Audible alert beeps 3 times every 45 seconds The detector is not operational. The detector has been active for more than 10 years, and needs to be replaced.

To pause the smoke detector when the battery is low : Briefly press the sensor button Red indicator light flashes once every 45 seconds for about 8 hours The detector is not operational. The detector must be replaced.

When the battery is low, the smoke detector reacts as follows: Red indicator light flashes once every 45 seconds for at least 30 days Audible alert: 1 beep every 45 seconds for at least 30 days The detector is not operational. The detector must be replaced.

To stop the current alarm from your smoke detector : Briefly press the central button on the front of the detector Red indicator light flashes once every 10 seconds for about 10 minutes The detector resets automatically after 10 minutes.

By pausing the alarm, you can control a future false alarm in advance (e.g. smoke or steam generation when cooking, use of candles or incense, cigarette smoke, etc.). To temporarily pause the smoke detector : Briefly press the sensor button Red LED flashes every 10 seconds for about 10 minutes The detector resets automatically after […]