REMOTE+

Remote control for stand-alone detector

  • Controls smoke and carbon monoxide detectors

    Controls smoke and carbon monoxide detectors

    Remote control of ceiling-mounted detectors

  • General remote control

    General remote control

    A single remote control can operate all the detectors in a building

  • Long-range radio

    Long-range radio

    Allows detectors to be tested or shut down up to 100 m in an open field

  • Radio

Easily control your detectors*!

Need to test or turn off your home detectors? The REMOTE+ detector remote control makes it easy.

The remote control makes it easy to check detectors without having to enter housing.

Request a quote

A single remote control to operate all your detectors*

For installations with multiple detectors, the REMOTE+ detector remote control allows you to control all devices within a 100-meter radius in an unobstructed field, without any special settings or prior interconnection!

Simplifies testing and maintenance for professionals

A single remote control, for example, can be used to test all the detectors in a building quickly and efficiently, without having to climb ladders or handle each device individually.

Always at hand!

Compact, easy-to-carry remote control

3M adhesive fastener

Simplified mounting device for installing the remote control's magnetic holder without using screws or plugs. Avoids drilling into walls where asbestos, pipes or cables are present

Compact fastener

Only 3 cm in diameter to avoid damaging installation supports

Features

  • Terms of use

    Indoor environment
    Temperature: -10°C to +50°C
    Humidity: 0% RH to 100% RH (non-condensing)

  • Mounting type

    Wall-mounted or free-standing

  • Set contents

    1 product
    1 CR2032 battery
    1 magnetic holder with 3M adhesive tape

  • Warranty

    2 years***

  • Certification

  • Power supply

    Replaceable CR2032 lithium battery

  • Compatible detector models

    Smoke detectors: ORIGIN / ORIGIN+ / GUARD / GUARD+
    Carbon monoxide detectors: AIR / AIR+

  • Dimensions

    90 x 45 x 12 mm

References

Reference Frequency
A155LT 868 MHz

Interconnected sensors & remote controls

Detectors and remote control are equipped with a wireless communication module and use radio frequencies to exchange information.

In buildings with several detectors, a remote control unit can be used for centralized management, enabling all interconnected detectors to be tested or shut down immediately.

remote control / télécommande détecteur de fumée

Battery life 3 years**

  • Very low power consumption of the remote control
  • Includes 1 replaceable CR2032 button cell battery

Discreet and compact

Easy to transport the device

Frequently Asked Questions

Our experts answer your questions

The REMOTE and REMOTE+ remote control is used to operate ORIGIN, ORIGIN+ smoke detectors or AIR, AIR+ carbon monoxide detectors. The remote control can stop the alarm and/or put the detectors on standby for a few minutes. A single REMOTE or REMOTE+ remote control can operate the detectors in all homes. The REMOTE remote control must be located within a maximum radius of 3m from the detector, and the REMOTE+ within a radius of 100m.

Products compatible with the REMOTE and REMOTE+ remote control are :

  • ORIGIN, ORIGIN+, GUARD and GUARD+ smoke detectors
  • AIR and AIR+ carbon monoxide detectors

A single remote control can operate detectors in all homes.

REMOTE runs on a replaceable CR2032 lithium battery with a 3-year operating life.

*Remote control compatible only with detectors equipped with a LoRaWAN radio module.

**The battery is designed for a non-guaranteed autonomy of 3 years: battery autonomy may vary. Please refer to “Precautions and Limitations” in the user manual.

***Please refer to the “Warranty” section of the user manual.