FIRST
Smoke detector
-
Design
Facilitates acceptance of the detector by occupants
-
10-year battery*
Sealed and welded lithium battery
-
Smoke
-
EN14604
Reliable at all times, for maximum safety
In less than 5 minutes, a fire can spread and fill a room with toxic and dangerous smoke.
Every second counts to warn occupants and enable them to react quickly.
Our smoke detectors are designed to operate optimally for 10 years, and to react quickly to the slightest sign of danger.
The detector alerts you to danger
A powerful audible alarm is vital to your safety, ensuring rapid detection and response in the event of fire.
At night, a loud alarm is essential to wake sleeping occupants and alert them to impending danger.
Powerful audible alarm
The detector features a powerful audible alarm, with a range of 85dB at 3m. By way of comparison, this represents the same sound volume as a TGV passing through your corridor.
Assured protection and simplified maintenance
Rapid smoke detection provides early warning in the event of fire. A well-maintained detector guarantees reliable detection and reduces the risk of malfunctions.
Air 360°
Our detector incorporates Air 360° detection technology. This exclusive design favors the circulation of smoke at the heart of the product for fast, reliable fire detection. Large rear openings simplify annual maintenance of the detector: 30 seconds are all it takes to perfectly clean the device using the brush attachment of a vacuum cleaner.
Insect barrier
For a smoke detector to be effective, it must be able to detect the presence of smoke quickly.
Insects can enter the device and disrupt its operation, causing unwarranted alarms.
Integrated protective grille
The insect screen is an essential part of the exterior design of our detector. It keeps pests out and reduces the risk of nuisance triggers. The anti-insect grille enhances the reliability, longevity and performance of your smoke detector.
Suitable for all installation configurations
Compact mounting base
Only 3 cm in diameter to avoid damaging the installation surface
Rip-off protection
Lockable mounting base to reduce the risk of detector removal in rental accommodation
Control your detector with your fingertips!
Need to test or stop your detector’s alarm?
Easy and simple to make, thanks to the button on the front of the product
Signal light
Discreet LED indicator in standby mode, powerful in alarm mode
Silence function
Stops the alarm and/or puts the detector on standby for 10 minutes without removing it from its base.
8-hour beep delay
Temporarily silences fault beeps until detector is replaced
Specifications
-
Smoke
Technology: Photoelectric smoke detection
Optical smoke detection by
diffused light (Tyndall effect)
Features
-
Set contents
1 detector
1 mounting base
2 nylon screws and plugs
1 user manual -
Dimensions
105 x 105 x 30 mm
-
Terms of use
Indoor environment
Temperature: 4°C to +45°C
Humidity: 0% RH to 99% RH (non-condensing) -
Mounting type
Wall or ceiling
-
Warranty
2 years**
-
-
Certification
EN14604
-
References
| Reference | Battery |
|---|---|
| N730FW | 10 years |
10-year battery life
- Very low power consumption for the detector and on-board electronics
- Includes 1 sealed and welded lithium battery
Who says smoke detectors can't be elegant?
Most residents consider smoke detectors to have an imposing, unattractive design.
Our product combines technology with a modern, minimalist design that blends harmoniously with any interior decor.
*The battery is designed for a non-guaranteed life of 10 years: battery life may vary. Please refer to the “Precautions and Limitations” section of the user manual.
**Refer to the “Warranty” section of the user manual.