INSAFE

Smoke detector

  • Design

    Design

    Facilitates acceptance of the detector by residents

  • 10-year battery*

    10-year battery*

    Sealed and welded lithium battery

  • Digital logbook

    Digital logbook

    QR Code + application for monitoring installation and maintenance of a fleet of detectors

  • Smoke

  • 10 years*

  • EN14604

  • NF292

Reliable at all times, for maximum safety

In less than 5 minutes, a fire can spread and fill a room with toxic and dangerous smoke.

Every second counts to warn occupants and enable them to react quickly.

Our smoke detectors are designed to operate optimally for 10 years, and to react quickly to the slightest sign of danger.

Request a quote
Smoke detector. 10-year battery / Détecteur de fumée

The product features Air 360° technology for ambient air analysis. Featuring large openings at the rear, this exclusive design allows gases to flow into the heart of the product for fast, reliable analysis.

The product features a powerful audible alarm, with a range of 85dB at 3m. By way of comparison, this represents the same sound volume as a TGV passing through your corridor.

NAVIXIS: the digital logbook for monitoring detectors

Smoke detector. 10-year battery / Détecteur de fumée

Complete history

Traceability of installation and maintenance of each device: useful information for insurance purposes or regulatory inspections

Ease of management

Information is stored and accessible online for simplified, centralized monitoring of a fleet of several thousand products.

API interface and connectors

The digital notebook integrates easily with your favorite management software thanks to our APIs and dedicated connectors

Automated tracking

The logbook can be configured to send reminders when it's time to check or replace products

The first detector designed for professionals

Do you have several thousand homes fitted with detectors?

Operational management of the installed base can quickly become complex, due to frequent changes of residents, maintenance problems and necessary replacements.

Protecting occupants and ensuring regulatory compliance requires a proactive approach.

Our solutions are specifically designed to meet these challenges!

Digital detector logbook

QR Code + application to monitor the installation and complete maintenance of a fleet of detectors. The digital logbook is a tracking tool specifically designed to meet the needs of lessors and property maintenance specialists.
Smoke detector. 10-year battery / Détecteur de fumée

QR'SAFE simplifies the use of detectors

Would you like to raise your residents’ awareness of fire risks, while providing them with clear information on how to use and maintain their detectors?

Enhanced security

QR'SAFE is a QR Code label to be stuck near the detectors so that occupants can learn how to use them optimally thanks to our advice.

Information always available

Residents simply scan the QR Code to access an online web page with all the information they need about their detector: operation, use, test frequency, maintenance, downloadable instructions, videos, etc.

Suitable for all installation configurations

Approved** 3M adhesive fastener

CE and NF-certified installation device to install the detector without screws or plugs. No need to drill through walls where asbestos, pipes or cables are present

Universal** mounting base

Simplifies replacement of other brands of detectors without drilling new mounting holes

Compact mounting base

Only 3 cm in diameter to avoid damaging the installation surface

Rip-off protection

Lockable mounting base to reduce the risk of detector removal in rental accommodation
Smoke detector. 10-year battery / Détecteur de fumée

Control your detector with your fingertips!

Need to test or stop your detector’s alarm?

It’s easy and simple to do, thanks to the large touch-sensitive button on the front of the product.

Silence function

Stops the alarm and/or puts the detector on standby for 10 minutes without removing it from its base.

8-hour beep delay

Temporarily silences fault beeps until detector is replaced

Signal light

Discreet LED indicator in standby mode, powerful in alarm mode

Specifications

  • Smoke

    Smoke

    Technology: Photoelectric smoke detector
    Optical smoke detection by
    diffused light (Tyndall effect)

Features

  • Set contents

    1 detector
    1 mounting base BASE
    2 nylon screws and plugs
    1 user manual

  • Terms of use

    Indoor environment
    Temperature: -10°C to +50°C
    Humidity: 0% RH to 99% RH
    (non-condensing)

  • Mounting type

    Wall or ceiling

  • Dimensions

    105 x 105 x 35 mm

  • Warranty

    5 years***

  • Certification

    EN14604

    NF292

References

Reference Battery
X730FW 10 years

10-year battery life

  • Very low power consumption for the detector and on-board electronics
  • Includes 1 sealed and welded lithium battery
Smoke detector. 10-year battery / Détecteur de fumée

Easy installation

Thanks to the product’s video unboxing, installation and commissioning of the detector go off without a hitch.

View video

Sustainable and eco-responsible

Nexelec is committed to responsible electronics. Our approach integrates respect for the environment right from the design stage. We choose sustainable materials, reduce energy consumption and aim to increase the longevity of our devices.

Read our environmental policy

Discover the 2024 Fire Safety catalog!

For over fifteen years, Nexelec has been dedicated to building surveillance, with occupant safety at the heart of its commitment.

Discover our range of reliable and innovative stand-alone detectors.

Read the catalog

Who says smoke alarms can't be stylish?

Most residents consider smoke detectors to have an imposing and unattractive design.

Our product combines technology with a modern, minimalist design that blends harmoniously with any interior décor.

Smoke detector. 10-year battery / Détecteur de fumée

Design & Performance

Frequently Asked Questions

Our experts answer your questions

The detector emits a beep

If the detector beeps every minute, this indicates a low or discharged battery.
There are several reasons for battery discharge:

  • Failure to maintain the detector (dust at least once a year)
  • Repeated false alarms or sub-optimal operating conditions

 

The detector emits three beeps

Three repetitive beeps every minute or so indicate that the detector has detected a fault in its smoke sensor. Follow the test procedure below to clean and test the detector:

  • Remove the detector from its base (1/4 turn to the left).
  • Clean the detector using the brush attachment of a vacuum cleaner to remove any dust that may have accumulated and interfered with the product’s operation.

  • Check detector operation. Press the central button for at least 3 seconds:

    • Case 1: If the detector emits a loud beep and the Red LED flashes, the detector is functional and should be reinstalled on its mounting base.
    • Case n°2: If the detector does not sound and the Red LED flashes dimly, the battery is low and the detector must be replaced.
    • Case 3: If the detector does not sound and the Red LED does not flash: wait 2 minutes.
      If the detector emits 3 consecutive beeps every minute, the sensor is faulty and the product must be replaced. If the detector does not beep, the battery is empty. The detector is no longer operational and must be replaced.

Check beforehand the precautions and limits of use of the detector, as well as the maintenance recommendations given in the user manual.

The presence of dust, the immediate proximity of an artificial light source, or nearby air movement caused by a convector, air-conditioning or ventilation unit, can cause the detector to go off for no apparent reason.
To maintain it, simply clean your detector (at least once a year) using the brush attachment of a vacuum cleaner and, if necessary, change its location.

Do not install the smoke detector in :

  • Less than 1.5 m from lighting fixtures: ceiling lights, incandescent, halogen or fluorescent lamps, etc.
  • A place where the detector is exposed to direct sunlight
  • Close to or above heaters, windows or other equipment that can generate air flows
  • Proximity to stray fumes: chimneys, furnaces, boilers, combustion radiators, etc.
  • A place where the temperature is below 4°C or above 45°C. A place where humidity is below 10% or above 95%: bathroom, laundry room, etc.
  • A dusty or dirty area: garage, workshop, etc.
  • An insect-infested or outdoor location

WARNING: for your own safety, do not disable your detector if it is operating correctly!

To switch off a sealed-battery detector, simply take a paper clip, insert it into the square hole at the back of the product, and pull slightly to raise the switch. If the detector has a changeable battery, simply remove the battery to switch the product off.

Please wait at least 20 seconds before switching the detector back on.

Our sealed-battery detectors are fitted with a battery with a maximum life of 10 years under normal conditions of use (with proper product maintenance). The detector battery is not replaceable. The end of battery life means you need to replace your detector.

On replaceable-battery detectors, you can change the battery whenever you need to. The product’s end-of-life is reached after 10 years of operation. End-of-life means that you must replace your detector.

Recycling the detector: A used detector is electronic waste and must be recycled. The detector must be deposited in a dedicated collection bin available from supermarkets, household appliance stores or waste collection centers.
If the detector is replaced by an identical product, the new detector must be compatible with the existing mounting base.

For all new products purchased, the company offers a commercial warranty on the durability of “Autonomous Warning Detectors” within the European Union, covering product defects with regard to the functions for which the detector was designed, in compliance with applicable standards, for a period of 5 years from the date of purchase. This longer-term guarantee
is free of charge. It does not constitute insurance. It is in addition to your legal warranties of conformity and hidden defects.
This warranty applies subject to compliance with installation, assembly and maintenance instructions, as well as precautions and limitations of use.
of the product.

It does not apply if the product has been modified/adapted, disassembled, if the serial number is illegible, in the event of damage to the detector caused by improper storage conditions, failure to observe mounting and maintenance instructions and/or precautions and limits of use.

Any malfunction or non-operation of the detector due to dust and/or insect infestation, despite maintenance in accordance with these instructions, is considered to be normal wear and tear and is not covered by the warranty. For details of how to make use of the warranty, please refer to the Service section of the User Manual and follow the instructions.
In the event of a product defect detected by the after-sales service and if the conditions for implementing the commercial warranty defined above and those set out in the § After-sales service are met, NEXELEC undertakes to repair free of charge the product returned by you at your expense or to replace it with an identical product.

 

SERVICE

Before you can apply for the contractual warranty, you must consult the information available on the www.nexelec.eu website and obtain a return number. No warranty claims will be accepted without a warranty number.
back.

If a defect is detected during the warranty period, the purchaser must send the detector to NEXELEC’s after-sales service department at his own expense.
The detector must be accompanied by a dated proof of purchase and a warranty claim form describing the defect.

*The battery is designed for a non-guaranteed life of 10 years: battery life may vary. Please refer to the “Precautions and Limitations” section of the user manual.

**Optional accessories available on request

***Refer to the “Warranty” section of the user manual