Archives

Every year, clean the detector and perform an alarm test: Remove the detector from its base Turn the detector over Remove dust with the brush attachment of a vacuum cleaner, sucking for 30 seconds (any insects, spider webs or dust clusters near the detector must be removed). Press the Test / Silence button until the […]

Every year, test the detector to ensure that the light and sound indicators are working properly.

Depending on the configuration and surface area of your home, you may need several smoke detectors to ensure minimum protection, effective detection, alarm range and rapid evacuation. Standard installation one detector per floor in corridors and/or stairwells between sleeping areas (bedrooms), possible sources of fire (garage, electrical installation, etc.) and exits from your home (door, […]

For your safety, please observe the following points: Comply with all the instructions in this manual, and be aware that failure to replace your detector when the user manual specifies, pausing the detector and stopping an alarm can be dangerous. Do not install the detector in one of the “Locations to avoid”. Do not paint, […]

Depending on the model chosen, your detector has the following functions: INSAFE, smoke detector INSAFE+, smoke detector with NFC chip ORIGIN, connected smoke detector ORIGIN+, connected smoke detector, temperature and humidity sensors GUARD, connected smoke detector with changeable battery GUARD+, connected smoke detector with changeable battery, temperature and humidity sensors

A smoke detector is an alarm system designed to trigger an early warning in the event of a fire, thanks to its built-in sound system. The products are Autonomous Smoke Detectors (ASD) for domestic use. EN14604:2005/AC:2008 certification: The full text of the declaration of conformity is available on support.nexelec.fr The CE mark affixed to this […]

Your smoke detector features a red indicator light on the front panel, plus a Test/Silence button. On the back of the product you’ll find the settings button and LED, as well as the battery cover. If your detector is fitted with a sealed 10-year battery, the battery door is locked.  

Box contains : 1 smoke detector 1 mounting base 2 screws and dowels 1 battery (GUARD range only) 1 user manual

RELAY incorporates an NFC antenna for product configuration. To do this : Activate NFC on your smartphone or tablet Download the Nexelec TOUCH application Bring your device to the top of RELAY, at the NFC symbol The application will then recognize the product and allow you to reconfigure it.

Remote configuration allows you to : Configure product Activate or deactivate the product To control RELAY remotely, you can use the NAVIXIS application or a third-party application compatible with the product.

After installing the RELAY product and opening the installation hatch, simply double-press the central button on an AIR or AIR+ carbon monoxide detector. The RELAY interconnection LED turns Green if the pairing process has been successful, otherwise it turns Red. Then close and lock the hatch. The RELAY status LED is visible from the outside. […]

RELAY opens or closes a relay to control the power supply to a device. To install RELAY, follow these steps: Switch off the power supply at the control cabinet Remove the case cover by unscrewing the safety screw (located on the underside of the product). Place the RELAY box in its intended location Screw in […]